Thread Daddy TD34916NG1 Impact driver attachment with 3D printed plastic body and gears.
90 degree 3/4" x 9/16" step down through socket and high speed Ecto-drive for use with 1/2" & 3/8" hex nuts on threaded rod. Impact ready, with 1/4" hex shank (3/8" impact adapter). Light weight and versitile, this high speed nut turning device has been proven to save countless man hours.
Invented by a 23 year journeyman commercial HVAC/R Installer / Working Superintendent. We have been building trapeze hangers, hanging equipment, piping, conduit, ductwork, kitchen exhaust hoods under fresh air make ups with grease ducts. This device enables new methods of installation. Not only does this device save the installer from fatigue, but it also boosts morale. I guarantee it.
LIGHT DUTY TD
Directions for use:
ALWAYS WEAR EYE PROTECTION.
Pinch Hazard! Keep fingers, hair and clothing away from moving parts.
REGULARLY lubricate the axis and shaft.
USE “LUCAS OIL semi –synthetic ASSEMBLY LUBE”
For external drive, place threaded rod between channel guides with hex nut pressed lightly against the Ecto-Drive.
For internal drive, (hex nut already attached to the threaded rod) place the threaded rod through the Infinity Socket and seat the hex nut inside the 12 point socket.
Do not use to lift or lower objects weighing more than 20lbs.
Do not run device over deformed, dirty, rusted, bent or painted threads.
Always use a hand held wrench to tighten, lock, set or break loose a hex nut from a fixed object.
Specs:
Model No.: TD34916NG1
3/4” Infinity Through Socket: For use with 1/2” hex nuts on 1/2” threaded rod.
9/16” Infinity Through Socket: For use with 3/8” hex nuts on 3/8” threaded rod.
ECTO-Drive: For use with both 1/2” and 3/8” hex nuts on threaded rod.
Max load: 20 pounds
Max RPM without load: 3000 RPM
Max run time without load: 30 seconds
Max RPM under load: 850 RPM
Max run time under load: 6 seconds
Weight: 5.6 ounces
Dimensions: 2.5”(L) x 1.75”(W) x 2.5”(H) *without driver adapter
Driver: 1/4” hex adapter